A more practical and versatile way to mount a kitchen cabinet is to use a mounting strip (tires) and special hinges. Despite the higher cost of the installation kit for this fitting, this method of installing furniture products has numerous advantages:

the assembled cabinet can be pushed horizontally and vertically;
the hinge plate and the mounting rail have a large load capacity and are intended for the installation of more massive mobile modules;
several separate mobile modules can be hung on the same assembly bus;

for a more secure fixing to the wall, the dashboard has a large number of mounting holes for fixing with a large number of self-tapping screws.

The markup for mounting the mounting bus does not differ from the method of fixing the fins. After drawing a horizontal line, holes are drilled in the wall, the anchors are hammered and the tire is mounted. The hinged fixing device is fixed inside the container to its side wall and the mounting hook is led through the space between its cover and the rear wall. It should be remembered that the tire itself is below the upper surface of the carcass, so the hook is attached to it “blindly” and requires some skills.

Suggestion:

After fixing the hooks on the mounting rail, the owners have the possibility to adjust (within small limits) the height of the suspension and eliminate distortions. By moving the cabinet along the table you find its optimal position.

Some apartment owners are skeptical about this type of attack, considering that the tire located along the length of the kitchen wall violates the aesthetics of the room. To avoid this unpleasant moment, after determining the permanent position of the cabinet, the bus can be cut into individual pieces, the length of which corresponds to the width of the rear chamber of the box.